„I rate it 200% positive, fast delivery of the rotary laser. When there was a problem with the laser, I was notified by email right over the weekend and the laser was available the next day. We are extremely satisfied, helpful and pleasant seller. I recommend."
Rotary lasers · levels · service
One level plane for the whole site – no guessing, no chasing a colleague
Whether you're building a house yourself, pouring foundations, laying floors, or setting the fall of a sewer line – a rotary laser gives you a precise level plane across dozens of metres that you can work with quickly, on your own. We sell directly from the manufacturer under our own brand, with warranty and service in Slovakia.
- Accuracy 1.5 mm / 10 m, range up to 800 m with an external receiver
- Everything calibrated and new – no refurbished units
- Spare parts in stock, free advice and training
12 years on the market
New digital model for slopes (2026)
Slovak manual
All prices are final; we are not VAT payers. To buy with VAT, please continue to nivelaky.sk.
Why us
Proven quality at low prices
We sell directly from the manufacturer under our own brand, with a warranty, in Slovakia.
Calibrated
Every device leaves us checked and calibrated.
New and unused
No refurbished units – we supply new, unused goods straight from the manufacturer.
Spare parts in stock
Receivers, tripods, rods and chargers – with no long wait.
Warranty and post-warranty service
Repairs and calibration, also for other brands of lasers.
Free advice
We'll help you choose and help with the work. You can try the device at our premises.
Slovak manual
Every laser comes with a manual in the Slovak language.
Specifications
Technical specifications of the rotary laser
A horizontal and vertical self-levelling rotary laser, designed for indoor and outdoor work with an external receiver.
- Measuring accuracy 1.5 mm per 10 m (20″)
- Self-levelling ± 5°, out-of-range tilt warning (HI alert)
- Manual slope adjustment ± 5° in both directions (X and Y axes)
- Rotation speed 0 / 60 / 120 / 300 / 600 rpm
- Scan angle 0° / 10° / 45° / 90° / 180° / 360°
- Laser class 2, power < 2 mW
- Wavelength 635 nm (red) / 532 nm (green)
- Remote control, range approx. 20 m
- Range approx. 500 m (red) / 800 m (green) with an external receiver
- Receiver accuracy in fine/coarse mode ± 1 mm / ± 2 mm
- Operating temperature −20 °C to +45 °C
- Protection rating IP54 (dust and splashing water)
- Power: 4× D NI-MH battery (4.8–6 V), alkaline batteries also possible
- Battery life approx. 20 hours, charging time approx. 10–12 hours
- Tripod thread 5/8″ (standard for construction tripods)
- Weight: laser alone approx. 2 kg · case with basic equipment approx. 5 kg · complete set approx. 10 kg
| Accuracy | ± 1.5 mm / 10 m |
|---|---|
| Self-levelling | ± 5°, automatic on power-up |
| Slope adjustment | ± 5° manual, X and Y (digital model electronic) |
| Rotation | 0 / 60 / 120 / 300 / 600 rpm |
| Scan angle | 0° / 10° / 45° / 90° / 180° / 360° |
| Range with receiver | approx. 500 m red · approx. 800 m green |
| Laser class | 2 (< 2 mW), 635 nm / 532 nm |
| Protection rating | IP54 |
| Operating temperature | −20 °C to +45 °C |
| Power | 4× NI-MH (4.8–6 V), battery life approx. 20 h |
| Tripod thread | 5/8″ |
| Weight | laser approx. 2 kg · case with basic equipment approx. 5 kg · complete set approx. 10 kg |
The stated values are typical for this type of device; we will confirm the specific parameters based on the model chosen.
What's in the case
Rotary laser (red or green beam), external sensor (beeper) with a rod holder, remote control, mains charger, reflective target, safety glasses, and case keys.
Available as an add-on: a tripod, a 5 m telescopic levelling rod, and a digital external receiver that shows the deviation directly in millimetres.
Digital model for slopes
The new model lets you set the slope independently on the X and Y axes directly on the display or via the remote control, and it maintains the set tilted plane. The package also includes an external receiver with millimetre readout.
Suited to sewer connections, drainage, paved surfaces, driveways, and grading work where an accurate fall matters.
Difference between a red and a green beam
Red beam
Wavelength 635 nm. A proven, cost-effective choice. For outdoor work with a receiver on the rod, it works reliably for most earthworks and construction tasks.
Green beam
Wavelength 532 nm, noticeably more visible to the human eye. Advantageous indoors and in halls. In direct sunlight, an external receiver is still required.
Videos
See our lasers in action
Digitálny externý prijímač
Digitálny externý prijímač zobrazuje odchýlku priamo v milimetroch na displeji – rýchlejšie a presnejšie nastavenie roviny.
Service
Warranty and post-warranty service and calibration
We also service and calibrate lasers of other brands. Advice is free of charge, and you can come try the device at our premises in Švábovce near Poprad.
Calibration
We supply new devices already calibrated. We can also calibrate your own laser.
Repair
Warranty and post-warranty repairs, replacement of worn parts, accuracy diagnostics.
Spare parts in stock
Receivers, tripods, rods, holders and chargers – available with no long wait.
About us
We only sell what we believe in ourselves
For 12 years we've been selling rotary lasers for a wide range of people – from builders to DIY enthusiasts. We aim to supply only proven quality at low prices.
We can advise you and also arrange service, maintenance or calibration for your own device. We supply devices directly from the manufacturer under our own registered brand (trademark No. 257570).
Reviews
Happy customers
Average 5.0 / 5 from 16 reviews.
„I have had the laser for over a year now and I am extremely satisfied, as are the employees who use it. TOPKA."
„I was very satisfied with the ordered goods. Delivery on time and the service during the renovation of the building was irreplaceable. Great."
Blog
How to choose and use a rotary laser
Practical articles about measuring on site, receivers, slopes and accessories.
2026.10.13 15:59
When laser repairs save a working device
Laser repairs on construction sites: when is calibration enough, which errors can be fixed, and how to avoid expensive downtime when working in the field every working day.
Read article →
2026.10.13 15:58
Laying out the foundations: a step-by-step example
Laying out foundations using the example of a family house: procedure, checking diagonals and working with a rotating laser for precise heights without expensive construction mistakes every time.
Read article →
2026.10.09 14:48
Why calibrate the level before every construction project?
Find out why you should calibrate your level before concreting, assembly or excavation. Accurate measurement saves material, time and repair costs on every job.
Read article →
Our partners
Companies that work with us
Tempera Inštalatér
Plumbing work, service and reconstruction of plumbing, underfloor and solar heating.
www.tempera.skToSeLi s.r.o.
Comprehensive reconstructions, insulation, facades, turnkey house construction, tiling, custom-made furniture and painting services.
www.toseli.skVyVa Fasády
Construction activities, insulation, facade modifications, tiling, reconstruction and turnkey house construction.
www.vyva.skLS THERM
Comprehensive construction services including consulting before and during implementation, emphasis on quality materials and trained workers.
www.lstherm.skStriekacie zariadenia – Airless
High-pressure airless sprayers for fast painting of walls, ceilings and structures for professionals and skilled craftsmen.
www.striekaciezariadenia.sk
Download
Manual in the Slovak language
We'll send you the Slovak-language rotary laser manual by e-mail. Enter the e-mail address and the PIN code you received on purchase.
Please do not share the manual further.
Contact
Write or call us
We handle orders and service questions by phone or e-mail. We'll get back to you as soon as possible, usually the same day.
-
Address / personal pickup Švábovce 65 (Poprad), 059 12
-
Opening hours Pondelok – Nedeľa: 8:00 – 20:00